With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
The Basics of the Two Types of Assessment Validation
Assessment Validation: What It Is
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Steps to Perform Assessment Tool Validation
Now that we understand the two types of validation, let’s explore the details of assessment tool validation.
Timing of Assessment Tool Validation
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.
There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated
- your scope includes new training products
- course gets reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
Which Training Products to Validate?
It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.
Resources Needed to Start Assessment Tool Validation
Instructional Resources
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Team
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
As a whole, your validation panel must have:
Vocational competencies and current industry skills relevant to the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its replacement
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.
ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.
We strongly recommend using a more detailed template to inspect each unit requirement and the assessment items that map to them. Here is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?
Flexibility – Does the assessment provide multiple options to show competence according to various needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?
Key Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Show What You Mean
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy changing
bottle preparation, bottle-feeding babies, and cleaning equipment
solid foods preparation and feeding babies
appropriately respond to baby signs and cues
prepare and settle infants for sleep
monitor and support age-appropriate physical exploration and gross motor skills
Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Total or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not get more info yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
Possible answers include:
Necessary materials
Relevant costs
Time assigned for activities
Assigned functions and responsibilities
When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolation of the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolating, engineering controls, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, engineering controls, administration
Equipment or machinery – isolation, engineering, administration
Steering clear of double-barrelled questions makes it easier for students to respond and for assessors to judge student competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.